Indesit CA 55 series (UK) 사용 설명서 - 페이지 7

{카테고리_이름} Indesit CA 55 series (UK)에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Indesit CA 55 series (UK) 12 페이지. Indesit refrigerator user manual
Indesit CA 55 series (UK)에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지)

페이지 인쇄

Using the freezer to its full potential

• Do not re-freeze food that is defrosting or that has

already been defrosted. These foods must be cooked

and eaten (within 24 hours).

• Fresh food that needs to be frozen must not come into

contact with food that has already been defrosted.

Fresh food must be stored above the grill in the freezer

compartment and if possible be in direct contact with

the walls (side and rear), where the temperature drops

below -18°C and guarantees rapid freezing.

• Do not place glass bottles which contain liquids, and

which are corked or hermetically sealed in the freezer

because they could break.

• The maximum quantity of food that may be frozen

daily is indicated on the plate containing the technical

properties located on the bottom left side of the

refrigerator compartment (for example: Kg/24h: 4)

• In order to obtain a greater amount of space in the

freezer compartment, you may remove the bins

(except the lowest bin and the special COOL CARE

ZONE bin, which has an adjustable temperature) and

place the food directly onto the evaporator plates.

! Do not open the door during freezing.

! If there is a power cut or malfunction, do not open the

freezer door. This will help maintain the temperature

inside the freezer, ensuring that foods are conserved for

at least 9 -14 hours.

! If the room temperature drops below 14°C for an

extended period of time, the ideal temperature will

not be reached in the freezer compartment and food

preservation will be reduced.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24

ice trayï.

Ice

The fact that they are situated on the top part of the

freezer drawers ensures greater cleanliness: the ice no

longer comes into contact with the food placed inside

the freezer compartment; furthermore, the dripping of the

water during filling is avoided (a lid to cover up the hole

after filling with water is also provided).

1. Pull out the tray by pushing it up. Check that the tray is

ompletely empty and fill it with water through the opening

provided.

2. Take care not to exceed the level indicated (MAX

WATER LEVEL). Excess water prevents the ice cubes

from dispensing (if this happens, wait for the ice to

melt and empty the tray).

3. Turn the tray 90°: due to the connected compartments

each mould fills with water (see diagram).

4. Close the opening with the lid provided and put the

tray back, placing the top part in the corresponding

housing and allowing it to drop in again.

5. When the ice has formed (minimum time approximately

8 hours) knock the tray against a hard surface and wet

the outside so that the ice cubes come loose and take

them out through the opening.

MAX

WATER LEVEL