A-Neu Video ANI-0104POE-AU 사용 설명서 - 페이지 4

{카테고리_이름} A-Neu Video ANI-0104POE-AU에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. A-Neu Video ANI-0104POE-AU 16 페이지. 1x4 hdmi 18gbps splitter over cat6 196ft/60m

페이지 인쇄

NEUVIDEO

FEATURES

• HDMI 2.0, HDCP 2.2 / 1.x and DVI 1.0 compliant

• Supports 18Gbps video bandwidth

• Supports video resolution up to 4K2K@50/60Hz 4:4:4

• Supports 3D, HDR, HDR10+, HLG and Dolby vision

• Supports up to 7.1CH HD audio pass-through

• Supports digital and analog audio de-embedded output

• Extends the signal transmission distance up to 114ft/35M at the resolution of 4K2K@60Hz, 164ft/50M at 4K2K@30Hz, 196ft/60M at

1080P@60Hz via a single CAT6/6a/7 cable

• Supports (1) HDMI input, (1) HDMI loop output and (4) CAT outputs

• Supports one-way IR control signal pass-through

• Advanced EDID management

• Supports one-way PoC function (only from transmitter to receiver)

• Compact design for easy and flexible installation

NOTES

For the best results, it is suggested you use pure copper and not copper clad aluminum and use solid, riser rated cable and not stranded

cable. Stranded cable has ~20% higher signal attenuation than solid, so its runs need to be shorter.

Contiguous cable runs are preferred. The use of network punch down into patch panels and keystone jacks adds attenuation and runs

need to be shorter.

The use of EZ-45® connectors are not recommended as the cable extends outside the end of the RJ45 connector and can act as an

inductor of noise.

FEATURES