Indesit HOTPOINT LUCE DX1032CX 서비스 매뉴얼 - 페이지 14

{카테고리_이름} Indesit HOTPOINT LUCE DX1032CX에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Indesit HOTPOINT LUCE DX1032CX 39 페이지. Built-in touch control electronic multifunction 60 cm double oven

페이지 인쇄

Indesit

Company

Setting the Minute Minder

The minute minder may be set regardless of whether the oven is switched on or off. It does not

switch the oven on or off.

When the set time has elapsed, the timer emits a buzzer that will automatically stop after 30

seconds or when any active button on the control panel is pressed.

To set the minute minder proceed as follows:

1. Press button

2. Set the desired time using buttons + and -.

3. Once you have reached the desired value, press the

The lit

symbol will remind you that the minute minder is on.

To cancel the minute minder, press the

00:00. Press button

The

icon will switch off to indicate that the minute minder has been disabled.

Starting the Oven

1. Switch the control panel on by pressing the

times (ascending) and all buttons light up in sequence.

2. Select the TOP OVEN/ GRILL or MAIN OVEN by pressing the

OVEN

icon

3. Press the button corresponding to the desired cooking mode. The TEMPERATURE display

shows:

- the temperature associated with the mode, if programming manually;

- 'Auto', if programming is automatic.

The TIME display shows:

- the current time, if programming manually;

- the duration, if programming is automatic.

4. Press the

button to begin cooking.

5. The oven will begin its preheating phase, the preheating indicators will light up as the

temperature rises.

6. When the preheating process has finished, a buzzer sounds and all the preheating indicator

lights show that this stage has been completed: the food can then be placed in the oven.

7. During cooking it is always possible to:

- change the temperature by pressing the

modes only);

- set the duration of a cooking mode (see Cooking Modes);

- press the

button to stop cooking. In this case the appliance stores the temperature

modified previously in its memory (manual modes only);

- switch off the oven by pressing the

8. If a power cut occurs while the oven is already in operation, an automatic system within the

appliance will reactivate the cooking mode from the point at which it was interrupted, provided

that the temperature has not dropped below a certain level.

Programmed cooking modes which have not yet started will not be restored and must be

reprogrammed (for example: a cooking mode has been programmed to start at 20:30. At 19:30

a power cut occurs. When the power supply is restored, the mode will have to be

reprogrammed).

Service Manual UK

button and use the + and – buttons to set the time to

again.

button for 3 seconds.

button again.

button. The appliance buzzer sounds three

button, followed by the + and - buttons (manual

14 of 39

TOP OVEN/GRILL or MAIN

English