AEG 1273-4 GS 사용 설명서 - 페이지 9
{카테고리_이름} AEG 1273-4 GS에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 1273-4 GS 24 페이지. Table top freezer
Warning! A cut-off plug inserted into a 13 amp socket is a serious
safety (shock) hazard. Ensure that the cut-off plug is disposed of
safely.
Plug socket
The plug socket necessary for connection of your appliance to the
electricity supply should be positioned so that it is possible to pull out
the appliance plug.
A concealed spur socket requires 10 A/16 A fusing.
Rehingeing the door
The side at which the door opens can be changed from the right side
(as supplied) to the left side, if the installation site requires.
Warning! When changing the side at which the door opens, the appli-
ance may not be connected to the mains. Remove plug from the
mains beforehand.
Tilt the appliance slightly towards the
rear and prop it securely.
Unscrew the door hinge screws (K)
and take the door bearing (1) down
wards out of its cavity.
Open the door a little way and take it
out downwards.
Unscrew the upper pin (A) and screw
it into place on the opposite side.
Fit the door into the upper pin (A)
and close it.
Insert the pin of the door bearing (1)
into the left hand cavity and
screw the bearing firmly into place
with the screws (K).
AEG97
12
A
AEG98
1
K
9