AEG A62900GSX0 사용자 설명서 - 페이지 12

{카테고리_이름} AEG A62900GSX0에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG A62900GSX0 20 페이지.
AEG A62900GSX0에 대해서도 마찬가지입니다: 사용자 설명서 (24 페이지)

페이지 인쇄

What to do if...

Clean the condenser (black grill) and the compressor at the back of the appliance with a

brush. This operation will improve the performance of the appliance and save electricity

consumption.

Take care of not to damage the cooling system.

Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the

plastics used in this appliance. For this reason it is recommended that the outer casing of

this appliance is only cleaned with warm water with a little washing-up liquid added.

After cleaning, reconnect the equipment to the mains supply.

Defrosting of the freezer

The freezer compartment of this model, on the other hand, is a "no frost" type. This means

that there is no buildup of frost when it is in operation, neither on the internal walls nor on

the foods.

The absence of frost is due to the continuous circulation of cold air inside the compart-

ment, driven by an automatically controlled fan.

Periods of non-operation

When the appliance is not in use for long periods, take the following precautions:

• disconnect the appliance from electricity supply

• remove all food

• defrost

and clean the appliance and all accessories

• leave the door/doors ajar to prevent unpleasant smells.

If the cabinet will be kept on, ask somebody to check it once in a while to prevent the food

inside from spoiling in case of a power failure.

WHAT TO DO IF...

WARNING!

Before troubleshooting, disconnect the mains plug from the mains socket.

Only a qualified electrician or competent person must do the troubleshooting that is not in

this manual.

Problem

The appliance does not

operate. The Pilot light

does not flash.

5) If foreseen.

Possible cause

The appliance is switched off.

The mains plug is not connected

to the mains socket correctly.

The appliance has no power.

There is no voltage in the mains

socket.

Solution

Switch on the appliance.

Connect the mains plug to the

mains socket correctly.

Connect a different electrical ap-

pliance to the mains socket.

Contact a qualified electrician.