AEG SANTO 70438-5 DT 사용 설명서 - 페이지 39
{카테고리_이름} AEG SANTO 70438-5 DT에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG SANTO 70438-5 DT 40 페이지.
페이지 인쇄Changing the light bulb
Warning! There is a risk of electric shocks! Before changing the light bulb,
switch off the appliance and unplug it, or pull the fuse or the circuit breaker.
Light bulb data: 220-240 V, max. 15 W
1.
To switch off the appliance, turn the temperature regulator to position "0".
2.
Unplug the mains plug.
3.
To change the light bulb, undo the
screw.
4.
Press the light bulb cover as shown
and slide it backwards.
5.
Change the defective light bulb.
6.
Refit the light bulb cover and the
screw.
7.
Put the refrigerator back into opera-
tion.
Regulations, Standards, Guidelines
This appliance was designed for household use and was manufactured in
accordance with the appropriate standards. The necessary measures in
accordance with appliance safety legislation regulations (GSG), accident
prevention regulations for refrigeration appliances (VBG 20) and the regu-
lations of the German Society of Electrical Engineers (VDE) were observed in
the manufacture of this appliance.
The refrigerant circuit has been checked for leaks.
This appliance is in accordance with the following EU guidelines:
– 73/23/EWG dated 19 February 1973 - low voltage guidelines.
– 89/336/EWG dated 3 May 1989
(including guideline change notice 92/31/EWG) - EMV guideline
D411
39