AEG LAVATHERM 57720 electronic 사용 설명서 - 페이지 30
{카테고리_이름} AEG LAVATHERM 57720 electronic에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG LAVATHERM 57720 electronic 44 페이지.
What to do if ...
The drying result is unsatis-
factory; the washing is still
damp.
The drum illumination does
not work
The drying process takes
unusually long
The door cannot be opened
with the DOOR button
The door cannot be closed
Display EMPTY WATER is lit
EMPTY WATER indicator illu-
minated, even though the
container has already been
emptied
The dryer terminates the
drying process automatically:
END is displayed shortly after
programme start; no display
of the extent of drying
30
Symptom
Possible cause
The conductivity of the
water in your locality dif-
fers from the standard
setting of the appliance.
Is the tumble dryer
plugged in
The programme selector
is in the OFF position
The bulb needs replacing
The heat exchanger unit
is covered with fluff
Fluff filter is clogged
Electric mains plug not
connected
Programme selector set
to OFF
Fluff filter has not been
inserted correctly and/or
the filter lid not closed
Condensate container full
Foreign bodies, e. g. ani-
mal hairs, can block the
inlet nozzle as well as the
valve on the end of the
EMPTY WATER container
Too dry or too little
laundry filled-in for the
selected programme
Solution
Reprogramme the stand-
ard setting, eg. H0 instead
of H1, for dryer washing
(see chapter "Program-
ming Possibilities".
Plug in the tumble dryer
Turn the programme
selector dial to LIGHT
Replace bulb
Clean the heat exchanger
unit
Clean the fluff filter
Connect the mains plug
Set a programme. The
door can be opened at
any time by pressing
firmly against the door
(pressing location
Replace the fluff filter
and ensure the filter lid is
closed
Empty the condensate
container
With the container pulled
out, switch on the
appliance momentarily.
The blockage can be
removed from the contai-
ner shaft or the hair clea-
ned out of the valve
Select time programme or
higher drying stage (e.g.
EXTRA DRY instead of
INTENSIVE DRY)
)