AEG TR834E94E 사용자 설명서 - 페이지 22

{카테고리_이름} AEG TR834E94E에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG TR834E94E 32 페이지.

2. Pull the plastic connection out and drain

the water into a basin or equivalent

receptacle.

3. Push the plastic connection back in and

place the water container back into

position.

4. To continue the programme press the

Start/Pause button.

10.3 Cleaning the condenser

Heat exchanger flashes on

If the symbol

the display, inspect the condenser and its

compartment. If it is dirty, clean it. Do the

check not less than once a 6 months.

WARNING!

Do not touch the metal surface with bare

hands. Risk of injury. Wear protective

gloves. Clean carefully to avoid

damaging the metal surface.

To inspect:

1. Open the door. Pull the filter up.

ENGLISH

2. Open the condenser cover.

3. Turn the lever to unlock the condenser

lid.

4. Lower the condenser lid.

5. If necessary, remove the fluff from the

condenser and its compartment. You can

use a vacuum cleaner with the brush

attachment.

6. Close the condenser lid.

7. Turn the lever until it clicks into position.

8. Put the filter back.