AEG TR89P54B 사용자 설명서 - 페이지 14

{카테고리_이름} AEG TR89P54B에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG TR89P54B 32 페이지.

페이지 인쇄

6. OPTIONS

6.1 Dryness Level

This option helps to achieve requested laundry dry‐

ness. You can select the level of dryness:

ready to iron - iron dry level

ready to store - cupboard dry lev‐

ready to store - extra dry level

Default selection which is related to the programme

6.2 Time Dry

For: Cottons, Bed Linen XL, Synthetics and

MixDry programs. Lets the user to set drying

time from minimum 10 min to maximum of 2

hours (in 10 min steps). When this option is

maximum, load indicator disappears.

The cycle lasts as long as set drying time

regardless of the size of a load and its

dryness.

TIME DRYING RECOMMENDATION

up 10 min

action of cool air only (no heater).

10 - 40

additional drying to improve dryness af‐

min

ter previous drying cycle.

full drying of the small laundry loads up

> 40 min

to 4 kg, well spun (>1200 rpm).

Time Dry on Wool program

Option applicable to Wool program to adjust

final dryness level to more dry or less dry.

6.3 Anti-crease

Extends up to 120 minutes the anti-crease

phase (30 minutes) at the end of the drying

cycle. After drying phase drum rotates from

time to time to prevent creases. Laundry can

be removed during the anti-crease phase.

ENGLISH

6.4 Silent

The appliance operates with low noise

without effect on the drying quality. The

appliance operates slowly with longer cycle

time.

6.5 Refresh

To refresh clothes that were in storage.

Maximal load cannot exceed 1 kg.

6.6 Buzzer

The acoustic signal sounds at the following:

• cycle end

• start and end of crease guard phase

The acoustic signal is by default always on.

You can use this option to activate or

deactivate the sound.

Buzzer option off:

1. Turn the dryer on.

2. Select 1 of the available programs.

3. Touch and hold down Refresh button by

around 3 seconds.

The symbol

appears on the display.

4. To activate the Buzzer, touch the above

button again until the symbol disappears.

6.7 Finish In

This option allows choosing the time at

which a programme should terminate.

Once activated the machine waits for the

right moment to begin the drying process.

Finish In time is the sum of stand by time and

drying time.

To set the Finish In option:

1. Set the drying programme and options.