AEG TR8TRIER 사용자 설명서 - 페이지 23

{카테고리_이름} AEG TR8TRIER에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG TR8TRIER 32 페이지.

페이지 인쇄

2. Clean the surfaces of the humidity sensor

wiping off the metal surface several

times.

10.5 Cleaning the drum

WARNING!

Disconnect the appliance before you

clean it.

Use a standard neutral soap detergent to

clean the inner surface of the drum and drum

lifters. Dry the cleaned surfaces with a soft

cloth.

11. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

11.1 Error Codes

The appliance does not start or it stops during operation.

First try to find a solution to the problem (refer to the table). If the problem persists, contact the

Authorised Service Centre.

WARNING!

Deactivate the appliance before carrying out any check.

In case of major problems, the acoustic signals operate, the display shows an error

code and the Start/Pauze button may flash continuously:

Error code

Appliance motor overloaded.

E50

Too much laundry or entrap in the drum.

Do not use abrasive materials or steel

wool to clean the drum.

10.6 Cleaning the control panel and

housing

Use a standard neutral soap detergent to

clean the control panel and housing.

Use a moist cloth to clean. Dry the cleaned

surfaces with a soft cloth.

Do not use furniture cleaning agents or

cleaning agents which can cause

corrosion.

10.7 Cleaning the airflow slots

Use a vacuum cleaner to remove fluff from

the airflow slots.

Possible cause

CAUTION!

Remedy

The programme was not completed. Re‐

move the laundry from the drum, set the

programme and restart the cycle.

ENGLISH