AEG TR959M6BC 사용자 설명서 - 페이지 18

{카테고리_이름} AEG TR959M6BC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG TR959M6BC 36 페이지.

AEG TR959M6BC 사용자 설명서
18
www.aeg.com
Program
1) For partial loads, the cycle time is shorter and appliance uses less energy.
2) Improper ambient temperature and/or poorly centrifuged laundry can prolong cycle time and increase
the energy consumption.

7. OPTIONS

7.1 Dryness Level
This option helps to achieve requested
laundry dryness. You can select the level
of dryness:
1) Default selection which is related to the pro‐
gramme
7.2 Time Dry
For: Cottons, Bedlinen XL, Synthetics
and MixDry programs. Lets the user to
set drying time from minimum 10 min to
maximum of 2 hours (in 10 min steps).
When this option is maximum, load
indicator disappears.
The cycle lasts as long as
set drying time regardless of
the size of a load and its
dryness.
TIME DRYING RECOMMENDATION
up 10
action of cool air only (no heat‐
min
er).
additional drying to improve dry‐
10 - 40
ness after previous drying cy‐
min
cle.
Spun at / residual humidity
800 rpm / 50%
ready to iron - iron dry level
ready to store - cupboard
1)
dry level
ready to store - extra dry
level
Drying time
76 min
TIME DRYING RECOMMENDATION
full drying of the small laundry
> 40
loads up to 4 kg, well spun
min
(>1200 rpm).
Time Dry on Wool program
Option applicable to Wool program to
adjust final dryness level to more dry or
less dry.
7.3 + Anti Crease
Extends up to 120 minutes the anti-
crease phase (30 minutes) at the end of
the drying cycle. After drying phase drum
rotates from time to time to prevent
creases. Laundry can be removed during
the anti-crease phase.
7.4 Silent
The appliance operates with low noise
without effect on the drying quality. The
appliance operates slowly with longer
cycle time.
7.5 Refresh
To refresh clothes that were in storage.
Maximal load cannot exceed 1 kg.
7.6 End Signal
The acoustic signal sounds at the
following:
• cycle end
• start and end of crease guard phase
The acoustic signal is by default always
on. You can use this option to activate or
deactivate the sound.
Energy
consump‐
1)
2)
tion
0,62 kWh