Kohler 2473 설치 및 사용자 설명서 - 페이지 6

{카테고리_이름} Kohler 2473에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler 2473 24 페이지. Vanity cabinets and mirrors

Kohler 2473 설치 및 사용자 설명서
Note! Make sure that the drawer has been removed before turning the
vanity cabinet over. Refer to the section Remove and Adjust the Drawer
for more details.
1.
Turn the vanity cabinet over so that the bottom faces up.
Note! The legs must be installed opposite one another. Begin with the back
left corner, then to the front right corner.
2.
Insert a screw and washer through the hole in the back left leg, then
through the pre-drilled outer hole on the back left corner.
3.
Tighten the screw until there is no movement of the leg.
4.
Install the front right leg to the front right corner in the same manner.
5.
Insert the shelf into the groove of each installed leg.
6.
Install the two remaining legs in the same manner making sure that
the shelf is positioned into the groove in each leg before securing the
legs in position.
7.
Secure an L-bracket at each leg location, as illustrated.
8.
Turn the vanity cabinet back onto its legs and refit the drawer.
6
1067217-W2-B