Kohler Purist 1011420-2-B 설치 매뉴얼 - 페이지 3

{카테고리_이름} Kohler Purist 1011420-2-B에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler Purist 1011420-2-B 8 페이지. Kohler mirrored cabinet end cap kit installation guide

페이지 인쇄

Spacer Block

Make sure beveled end is

facing toward the front

1. Install the End Caps

- Locate the spacer blocks taped to end caps.

- Using a piece of masking tape, tape the spacer blocks in location on the outside of the cabinets. Make sure the

pilot holes line up with the recommended holes in the mirror cabinet.

- Install each end cap so the beveled edge is towards the mirror and the front of the cabinet. Align the end cap so

that it is centered to mirror height. Hold or clamp carefully (protect the surface if clamping) until attachment

screws are in place.

- Drive the #10 x 1 1/4" screws provided through the inside location holes, through spacer block holes and into the

predrilled end cap holes.

- Place dome cap covers over the screw heads.

Kohler Co.

Recommended Holes

End Cap

Dome Cap Cover

#10 x 1-1/4" Screw

1011420-2-