acaia AO203 사용자 설명서 - 페이지 4

{카테고리_이름} acaia AO203에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. acaia AO203 15 페이지.

Getting Started

1. Prior to using your Orion Mini for the first time you should rinse and clean the bean hopper in warm

soapy water. Dry immediately after cleaning.

2. Attach the bean hopper on top.

3. Place a container on the weighing platform to avoid accidental dispensing.

4. Connect the power cord to the Orion Mini.

5. Place coffee beans into the hopper.

Getting Started

1. Make sure that the weighing platform is clean.

2. Turn on the Orion Mini by pressing Power and place the container on the platform.

3. Set target weight by pressing Power. Adjust values with Dial then short press Power to confirm.

4. Press Dose to start dosing. If the display shows [ CUP ] [ rESEt ], please place a container on

the platform.

5. When a dose is complete, press Power to return to dosing.

The Orion Mini is designed for dosing portions of beans from 5 grams to a maximum of 3000

grams per dose with an accuracy of +/- 2 beans (~0.5 g).

There are two dosing modes in the Orion Mini — Manual mode and Auto mode. To choose

between modes, press and hold the Power button and the display will show the current mode of

operation. Rotate the dial to switch modes.

To take full advantage of the Orion Mini's many features, carefully read through the entire manual,

which contains step-by-step procedures, examples, and other information.

Warning: Incorrect handling of this product could result in personal injury or physical damage.