a-TroniX X45/10 설치 및 운영 지침 매뉴얼 - 페이지 16
{카테고리_이름} a-TroniX X45/10에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. a-TroniX X45/10 16 페이지. Mppt solar charge controller
페이지 인쇄
Machine Translated by Google
operation manual
MPPT solar charge controller X45/10
a-TronlX MPPT solar charge controller X45/10
battery parameters
Charging voltage
Restore charge voltage Turn off
lithium
lithium low voltage 9.0–15.0V (programmable)
Turn on low voltage again 9.6–16.0V (programmable)
Load protection
panel parameters
Maximum input power
Maximum voltage at the PV connection
Dusk/twilight detection in V
Day/Night Delay Time
MPPT tracking area
Maximum tracking efficiency
Load
working mode
output current
system parameters
Maximum charge conversion
communication distance
ownconsumption
size
Weight
ambient temperature
ambient humidity
degree of protection
Maximum height
*1 The VOC of the solar panel must not exceed this value, otherwise the controller will be damaged.
*2 VOC is the open circuit voltage of the solar panel.
page 16
target 9.2–16.8V (programmable)
If you have any questions, please do not hesitate to contact us!
AKKU SYS Accumulator and Battery Technology North GmbH
Verbindungsweg 23 25469 Halstenbek / Hamburg GERMANY
Telephone +49 4101 | 3 76 76-0 / [email protected] / www.akkusys.de
10.0–17.0V (programmable)
Yes, No, Slow (Lithium, Default: Yes) 0°C
130W
45V
3.0~8.0V (default: 5.0V)
0-30 min (programmable, default: 0 min)
(battery voltage +1.0V) -Voc*0.9 *1
>99.9%
Always on, Dusk, Five levels, Manual
(Default: Always On)
10A
96.50%
10m
8mA
85.8*81*23.1mm
260g -35~+60°C
0-100%RH
IP67
4,000m
Item No. 9887579
02/2022