Aqua Exclusive C-30 PRO 소유자 매뉴얼 - 페이지 17

{카테고리_이름} Aqua Exclusive C-30 PRO에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Exclusive C-30 PRO 20 페이지. Drum filter
Aqua Exclusive C-30 PRO에 대해서도 마찬가지입니다: 소유자 매뉴얼 (18 페이지)

페이지 인쇄

Controlbox

1. Connect the plugs of the devices to the appropriate sockets on the control box, see figure

12.

2. Insert the power plug of the control box (5) in the appropriate socket and switch on the

system by toggling the switch (9).

3. Hold the button (1) for ten seconds to activate the motor and high pressure pump.

4. After about 20 to 30 minutes the rinse cycle should be repeated automatically.

5. For longer delays, you can adjust the height of the float, see figure 6.

Please note: Immediately after the filter is installed/used, the rinse cycle may be very short

and will increase in length as the contamination/floating debris decreases, up to a cycle of 20

to 30 min.

Warning: when adjusting the float the power supply must always be switched off.

Figure 10: Controlbox

Manually Rinsing Button

UV-C Power Socket

Rinse Pump Power Socket

Fuse 1

Controlbox Power Plug

Installation

Controlbox

Water Pump Power Socket

Drum Motor Power Socket

Fuse 2

Controlbox ON/OFF Switch

10.

DMX connector water level sensor

Aqua Exclusive