A.M.Leonard WB6B 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} A.M.Leonard WB6B에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. A.M.Leonard WB6B 4 페이지. Poly tray wheelbarrow

Step 6)

Install Front Tray Braces - Position the lower angle end of #WB1007

Tray Braces onto the 3/4" bolts already secured to tray. Finger

tighten with Serrated Flange Nuts.

Step 7)

Install Nose Brace - Position the #WB1001 in place on outside of

handles, tow ring toward the tray. Slide the (4) 2-3/8" Slot Head

Bolts through the handles, from the inside, and secure Nose Brace

on outside with washers and nylon lock nuts.

Tow

Ring

Toward

Tray

Step 8)

Tighten Nose Brace Hardware - Completely tighten the Nose Brace

bolts/nuts at this time.

Step 9)

Install One Axle Bracket - Place a #WB1006 Axle Bracket into posi-

tion, bracket dimple to the outside. Insert a 2-1/2" Slot Head Bolt

through the handle and rear hole. Fasten washer and nylon lock nut.

Postion #WB1007 Front Tray Brace over front hole, install a 2-3/4"

Slot Head Bolt through the brace, handle, and axle bracket, then

secure with washer and nylon lock nut.

Front bolt secures both tray brace and axle bracket.

Step 10)

Install Wheel and Axle - Slip the#WB1008 axle through the Wheel.

Postion wheel between handles and slide axle into the installed axle

bracket.

Step 11)

Install Second Axle Bracket - Place the second #WB1006 Axle

Bracket over the axle end, align with handle holes, and secure with a

2-1/2" slot head bolt and 2-3/4" slot head bolt (front hole).