AVPro Edge ConferX AC-CXMF62-AUHD 빠른 시작 매뉴얼

{카테고리_이름} AVPro Edge ConferX AC-CXMF62-AUHD에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AVPro Edge ConferX AC-CXMF62-AUHD 6 페이지. 6 input, 2 output multi-format classroom/conference room matrix switcher

페이지 인쇄

AC-cxmf62-auhd

6 input, 2 output Multi-Format Classroom/Conference Room Matrix switcher

Quick Start Guide

The AC-CXMF62-AUHD is the ultimate switcher for connecting a variety of sources. HDBaseT, VGA, DisplayPort 1.2, and

HDMI allows for integration in almost any room where meetings take place. Simplifying class and conference rooms

farther with independent HDMI and HDBaseT output ports, allowing for distribution of video to a local monitor as

well as a presentation projector or display up to 100 meters away.

This quick start guide will be going through:

• INSTALLATION

• FRONT/REAR PANEL CONTROL

• EDID MANAGEMENT

• IR & RS-232 CONTROL

• LAN CONTROL

• TROUBLESHOOTING

Quick Installation:

1. Connect the HDMI/HDBT/VGA/DP1.2 input sources (PC, Wall Plate, etc...) to the AC-CXMFX62-AUHD.

2. Connect the HDMI/HDBT output devices (Display, Distribution Amplifier, Projector, Receiver) to the AC-

CXMFX62-AUHD.

3. Power on the sources.

4. Connect the power supply into the AC-CXMFX62-AUHD.

5. Turn on output devices/displays.

6. Use the front panel controls, supplied IR remote or free LAN (IP: 192.168.001.239) to control the matrix

Front Panel Control and commands: