AVPro Edge AC-CXWP-HDMO-T 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} AVPro Edge AC-CXWP-HDMO-T에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AVPro Edge AC-CXWP-HDMO-T 4 페이지. Wall plate transmitters

Input Switching:

Each wall plate utilizes auto sensing technology. This means once a source is connected the

wall plate will recognize the connection and automatically send the signal to the display.

For the VGA and MDP wall plate: if you already have a source plugged into the wall plate and

you plug in another source the wall plate will automatically switch to the source that was

just put in.

If you have 2 sources plugged into the VGA/MDP wall plate you can switch between the inputs

by pressing the square lit up button. A green light indicates that MDP/VGA is being used and an

amber colored light indicates that HDMI is selected.

If the active source is unplugged it will automatically switch to the other plugged in source.

EDID Management:

EDID management allows you to manage

the input device (typically the display) to

request specific video resolutions and/

or audio codecs from a source. EDID can

be toggled using the turn dial (Located on

bottom of unit opposite of HDBT port).

Use a flathead screwdriver to toggle be-

tween different preset EDIDs by twisting

the dial to the preferred EDID. The following choices are available:

4K60HZ 420 3D 2Ch [Default]

4K60HZ 420 3D 4CH

4K60HZ 420 3D 8CH

4K60HZ 420 HDR BT2020 3D 2Ch

4K60HZ 420 HDR BT2020 3D 6Ch

4K60HZ 420 HDR BT2020 3D 8Ch

4K30HZ RGB 3D 2CH

4K30HZ 444 3D 6CH

4K30HZ 444 3D 8CH

4K30HZ 444HDR BT2020 3D 2CH

4K30HZ 444HDR BT2020 3D 6CH

4K30HZ 444HDR BT2020 3D 8CH

1080P60 RGB 8 BIT 3D 2CH

1080P60 444 3D 6CH

1080P60 444 3D 8CH

Copy from output