AVProConnect AC-EX100-UHD-T 사용자 설명서 - 페이지 9
{카테고리_이름} AVProConnect AC-EX100-UHD-T에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AVProConnect AC-EX100-UHD-T 20 페이지. 100m hdmi 2.0 extender with hdcp 2.2 ethernet, audio extraction, edid management
AC-EX100-UHD
RS-232 Configuration
■
RS232 can be used to pass control signals bi-directionally to & from any
RS232 compatible device. This is commonly used to rout control signals
in the following way:
1. Control System --> Display/Projector (ie, Power On/Off)
2. Display/Projector --> Control System (ie, Display Status, Volume
Status etc...)
3. As a long range serial port extender (ie, Use the extender when you
need ultra long range serial communication at concerts, live events
etc...)
The unit comes with 3 pin
connectors to use any wire you
would like, the Pin out configuration
Left=Tx, Center=Ground, Right=Rx
and looks like this:
This is how your cable shold look.
If you are using the AC-CABLE-3.5-
DB9F (Female) or AC-CABLE-3.5-
DB9M (Male), the colors will be the
same as well. With any other
cable, please follow Tx, G, Rx as
shown above. A RS-232 Cable
Preparation diagram is on the next
page.
9