Aqua Pulse Spas Coral Classic Spa 사용자 설명서 - 페이지 12

{카테고리_이름} Aqua Pulse Spas Coral Classic Spa에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Pulse Spas Coral Classic Spa 15 페이지.

SETTING THE TIME

When turning on the spa for the first time you will need to set the clock time. To

set the clock time the spa must be in Standby mode.

Please ensure the spa is in Standby Mode (---). The three horizontal dashes must be displayed. Press

the

The hour and minutes will begin to flash on the display.

Press the

Once the desired time is selected wait for 5 seconds.

The hour and minutes will remain static once this has completed.

If your spa loses power you may need to reset your time of day and being a digital clock the clock itself can gain or

lose time requiring adjustments to be made.

In order to keep your spa clean you need to set the cycle cleaning. This feature will automatically turn on all of the

spas jets temporarily to purge the spas water and then will run the spas filter for the set period of time. You must

run this feature for a minimum of 6 hours every day.

To set the 6-hour cleaning cycle ensure the spa is in Standby Mode (---)

Now press

Now enter the time of day you want the spa to begin the cycle cleaning, using a 24-hour clock.

To adjust the time, press the

Once you have selected an appropriate time press

Now enter the duration for which you want the spa to cycle clean.

To adjust the duration, press the

Which will read 6:00.

Once you have selected an appropriate duration press

Now press the

This symbol

button to enter the time setting mode.

and

buttons to adjust the time, the time is set in a 24-hour clock.

and

button.

will now appear on the display panel to indicate that cycle cleaning has been set.

buttons.

buttons, you must set at least a 6-hour period.