Aqua Pulse Spas Miami Classic Spa 사용자 설명서 - 페이지 14

{카테고리_이름} Aqua Pulse Spas Miami Classic Spa에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Pulse Spas Miami Classic Spa 16 페이지.

TURNING ON THE HEATER MANUALLY- MAINTAINING HEAT

Ensure the spa is in Active Mode.

Press the

button to adjust the temperature to the desired temperature.

Press this

button to turn on the heater manually.

You will see the word heat flashing on the touchpad, once the heat word goes solid and stops flashing the

spa is heating. If you leave the spa in active mode and leave this button turned on permanently it will

maintain the set temperature within 3 degrees. For example, if you set the spa to 38 degrees it will take the

spa to 38 degrees automatically turn off and when the spa drops 2 to 3 degrees in temperature it will turn

back on and re heat the spa to 38 degrees. If the head word in not flashing or solid on the touch pad the

button has been turned off and will need to be re pressed to turn this feature back on.

TURNING ON THE HOT WATER MASSAGE PUMP

Press this

To turn off the hot water pump press the same button again.

This pump will automatically turn itself off after a set amount of time running, if it turns off while you are

in the spa you can press the same button to make it run again.

TURNING THE LIGHTS ON & OFF

Press this

button once to turn on the lights, the lights will now alternate between a number of

colours.

To hold a particular colour press this

To turn the lights off press the button a third time

FROST PREVENTION SYSTEM

If the temperature of the spas water drops below 5°C the spa will switch on the heater until the spa

reaches the temperature of 8°C.

OZONATOR

button to turn on the hot water pump.

button second time.