Aqua Select 832406SC 매뉴얼 - 페이지 4

{카테고리_이름} Aqua Select 832406SC에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Select 832406SC 8 페이지. Heavy duty resin in-pool ladders with entrapment barrier

페이지 인쇄

NOTE

• This Ladder is designed to fit multiple pool heights. ONLY

FOLLOW THIS STEP IF YOUR POOL HEIGHT IS 48".

• Locate the leg (AC 01129) on both sides

of the ladder.

• Find the lines located at the top of the legs.

Using a hacksaw

•

• Place the Lower Base (AC 01126) on a level surface.

• Snap Large Barrier (AC 01123) into the groove on the lower

base facing round edge.

• Snap Small Barrier (AC 01124) into the groove on the lower

base facing the straight side.

• Slide Upper Brace

(AC 01125) over Small

Barrier as shown.

• Slide Upper Brace (AC 01125)

through the groove in the Large

Barrier and push down lightly to

secure.

• Screw Lower Base of Entrapment Barrier into bottom

• Screw Upper Brace of Entrapment Barrier into the

third step of the Inside Portion of the Ladder with

(2) #10 x 1-1/4" screws

Follow this step if using as an In Pool Ladder

cut both legs evenly along the line.

STEP 3

step of the Inside Portion of the Ladder with

(2) #10 x 1-1/4" screws.

STEP 4

FOR 48" POOLS, CUT ALL FOUR

LEGS AT THIS LINE