ABATEMENT AQUATRAP AT150RS 운영 매뉴얼 - 페이지 3
{카테고리_이름} ABATEMENT AQUATRAP AT150RS에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ABATEMENT AQUATRAP AT150RS 6 페이지. Lgr dehumidifier
페이지 인쇄
Inspect filter. Look for accumulated dust and dirt that would restrict airflow
through the filter into the unit. If any is visible, vacuum out the debris. Do
not wash the filter, as it will reduce the effectiveness of the electrostatic
material.
Important: Replace the filter after:
It has been vacuumed clean 3 times.
It has been used on a mold remediation job.
Periodic Inspections (as needed)
Make sure the unit is unplugged. Remove housing, in order to locate the coil,
pump and drain hose.
Check coil and clean visible dirty
Vacuum both sides of the coils until clean.
Check pump
Inspect and clean the pump system regularly to maintain effective
operation. Remove one screw to open up the top cover, and then
open up the second cover. Clean the float shaft to make sure the
floating switch can operate smoothly.
Check drain hose
Look for obstructions. Disconnect and clear any debris present.
Warranty
Abatement warrants to the original purchaser that if, within a period of 12
months from the date of purchase, this equipment is found to be defective
either in original materials or workmanship (excluding normal usage wear and
/or mishandling or abuse) the faulty part will be replaced free of charge upon
presentation of the appropriate evidence, provided the unit is returned to the
original supplier. Shipping expenses are not covered under the warranty.
Abatement Dehumidifiers are used by professionals for the drying out of wet
materials such as carpets, carpet cushions, floors, walls, building contents and
more. They reduce the water in enclosed structural environments like buildings
or parts of a building by removing water vapor from the air.
Safety Instructions
Do not allow children to play with or around the operating unit.
Keep wiring and motor dry. Never operate the unit in standing water, rain
or snow, as this may create a risk of injury from electric shock.
Do not use residential three way multiple plug adapter.
Do not operate the unit with a damaged power cord.
Always operate the unit with a grounded plug and with a grounded
supply.
Extension cords must be grounded and be able to deliver the appropriate
voltage to the unit.
Do not drop or throw the unit.
Always operate the unit on a stable, level surface.
Do not clog or block air intakes.
Always to keep the filter clean.
Do not attempt to disassemble or repair the unit if you are not qualified to
do so.
How to Use Dehumidifiers
Setting Up a Drying Area
Managing the electrical consumption
The dehumidifier should be plugged into a grounded electrical outlet. In large
disaster environments, the use of optional 230V to 115V converters may be
helpful. This allows you to use the electricity from the electric stove or oven
which in turn will leave the electricity from the wall available for your air movers.
These converters will minimize tripping of electrical breakers when lots of air
movers and dehumidifiers are present.