Avsl Qtx 178.863UK 사용자 설명서 - 페이지 6

{카테고리_이름} Avsl Qtx 178.863UK에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avsl Qtx 178.863UK 9 페이지. Portable pa unit with led light show

Bluetooth™ Connection

On the media player, select '

Scan for Bluetooth devices on your smart phone or other Bluetooth enabled audio player and

check for a device called 'PAL SERIES'. Select this device and opt to connect your Bluetooth

device, which should then state that it is connected to "PAL SERIES" for audio output.

Play audio from your Bluetooth device and check for output through the PAL SERIES unit.

Ensure that the volume is turned up on the smart phone or other sending device.

If there is no output, check if there is more than one device within range called "PAL SERIES"

In the eventuality that more than one device is called "PAL SERIES", try each device in turn

until the PAL SERIES is found. Check also that the volume level is turned up on the sending

device.

Once audio is playing through the PAL SERIES from Bluetooth, adjust the MASTER control (18)

to the required volume.

In Bluetooth mode, the Play/Pause, Previous and Next buttons (15, 16, 14) can also remotely

control playback from the sending device. Holding down the Previous or Next buttons will

decrease or increase the Bluetooth output volume.

Bluetooth on the PAL SERIES can only pair to a single device at any one time and should be

operable over a range of 5 to 8 metres.

The media player controls are also available on the I.R. remote control handset and operate in

the same way as described above for the panel media player controls. The remote handset is

supplied with a clear plastic pull tab at the bottom, which must be removed to engage the

battery before operation.



' using the mode button (4).

Repeat function

Power on/standby

Channel +/- for FM tuner

Previous / Next track buttons

Volume up / down buttons

Mode select button

EQ profile select button

Play / Pause button

Numerical track select buttons 0-9

PAL SERIES User Manual