Abatement Technologies AQUATRAP AT150R 운영 매뉴얼 - 페이지 4
{카테고리_이름} Abatement Technologies AQUATRAP AT150R에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Abatement Technologies AQUATRAP AT150R 12 페이지. Lgr dehumidifier
페이지 인쇄
Create a closed drying chamber
The dehumidifier should be operated in an enclosed space in
order to create a drying chamber. Close all doors, windows or
areas that open to the outside to maximize the unit's water
removal efficiency. Inside the drying chamber, air should
circulate freely. Open interior doors and turn on Air Movers to
increase the circulation.
Position the dehumidifier
Place the dehumidifier in the center of a room and keep it away
from anything that could prevent airflow into and out of the unit.
Managing the rising temperature
The dehumidifier warms the air as it removes moisture. Room
temperatures
temperatures for drying.
flooded homes, set the A/C to 68°F with the A/C blower on
constant (ON). This will circulate the air in the entire home to
make sure the dry air is distributed evenly. In the winter, set
the furnace to at least 65°F with the blower set to the "ON"
position.
When the unit has been stored or transported in temperatures
below 60°F, place the dehumidifier in the room for about an
hour before operating (when possible). This will allow the unit
to acclimate to the warmer ambient temperature minimizing
conditions that cause the coils to freeze up thereby engaging
the defrost cycle.
CAUTION!
Never operate the Aquatrap
temperatures above 100°F. It could damage the
machine construction and internal components.
between
68°F
In summer months while drying
and
84°F
are
®
dehumidifier at
favorable