Dell C600 - Latitude Intel P-4 1.4GHz 서비스 매뉴얼 - 페이지 37

{카테고리_이름} Dell C600 - Latitude Intel P-4 1.4GHz에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell C600 - Latitude Intel P-4 1.4GHz 48 페이지. Latitude c600/c500 series
Dell C600 - Latitude Intel P-4 1.4GHz에 대해서도 마찬가지입니다: 서비스 매뉴얼 (46 페이지)

페이지 인쇄

Dell C600 - Latitude Intel P-4 1.4GHz 서비스 매뉴얼

Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Manual

Removing the Microprocessor Module

NOTICE:

Disconnect the computer and any attached devices from electrical outlets, and remove

any installed batteries.

NOTICE:

To avoid ESD, ground yourself by using a wrist grounding strap or by touching an

unpainted metal surface on the computer.

NOTICE:

Read

procedure.

1. Remove the

hard

2. Remove the

keyboard

NOTICE:

To ensure maximum cooling for the microprocessor, do not touch the heat transfer areas

on the thermal cooling assembly. The oils in your skin reduce the heat transfer capability of the

thermal pads.

3. Remove the

microprocessor thermal cooling

NOTICE:

When removing the microprocessor module, pull the module straight up. Be careful not

to bend the pins on the microprocessor module.

4. Remove the microprocessor module.

NOTICE:

To avoid damage to the microprocessor, hold the screwdriver so that it is perpendicular

to the microprocessor when removing the cam screw (see

a. Use a small flat-head screwdriver and rotate the ZIF socket cam screw counter-clockwise 180

degrees to loosen the ZIF socket.

The ZIF socket cam screw secures the microprocessor assembly to the system board assembly.

Take note of the arrow on the ZIF socket cam screw (see

NOTE:

Your system has a type I or type II ZIF socket.

b. Use a microprocessor extraction tool to remove the microprocessor module.

Replacing the Microprocessor Module

NOTICE:

Seating the microprocessor module properly in the ZIF socket does not require force.

file:///F|/Service%20Manuals/Dell/Latitude/c500-600/remove.htm (30 of 40) [2/28/2004 7:53:33 AM]

"Preparing to Work Inside the

drive.

assembly.

Computer" before performing the following

assembly.

"Microprocessor

Modules").