ABB 2TLA020009R1600 원본 사용 설명서 - 페이지 4
{카테고리_이름} ABB 2TLA020009R1600에 대한 원본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB 2TLA020009R1600 20 페이지. Safety light beam
1
Introduction
Scope
The purpose of these instructions is to describe the safety light beam Spot and to provide the necessary
information required for assembly, installation, checks and adjustments after installation, and maintenance.
Audience
This document is intended for authorized installation personnel.
Prerequisites
It is assumed that the reader of this document has knowledge of the following:
Basic knowledge of ABB/Jokab Safety products.
Knowledge of safety devices and safety light beams.
Knowledge of machine safety.
Special notes
Pay attention to the following special notes in the document:
Danger of severe personal injury!
Warning!
An instruction or procedure which, if not carried out correctly, may result in injury to the technician
or other personnel.
Danger of damage to the equipment!
Caution!
An instruction or procedure which, if not carried out correctly, may damage the equipment.
NB:
Notes are used to provide important or explanatory information.
2TLC172178M0201, rev. D
2011-11-15
4
www.abb.com/lowvoltage