Dell OptiPlex FX130 매뉴얼 - 페이지 13
{카테고리_이름} Dell OptiPlex FX130에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell OptiPlex FX130 18 페이지. Re-imaging guide
Dell OptiPlex FX130에 대해서도 마찬가지입니다: 마운팅 매뉴얼 (8 페이지), 기술 매뉴얼북 (8 페이지)
페이지 인쇄3
Use the arrow keys to select an option that corresponds to the server
you wish to clone the disk image to. There are three choices available.
To clone the disk image to an NFS mounted server, select <6>
and press <Enter>.
To clone the disk image to Windows Share Network, select <7>
and press <Enter>.
To clone the disk image to an FTP server, select <8> and press
<Enter>.
4
If you are asked for credentials, you will need to enter a valid
username, password and, in the case of a Windows Share, a
domain name.
5
Once a connection has been established, the image cloning will
begin. A progress bar will display the current status of the cloning
process. Do not turn off your thin client during this time.
6
When the cloning is complete, the Re-Imaging Utility will return
itself to the Main Menu.
Using the Re-Imaging Utility to Update
BIOS on the Thin Client
Writing the BIOS to the Thin Client
When writing the BIOS onto the thin client, the BIOS itself must be on
the same hard disk or flash drive that contains the Re-Imaging Utility.
NOTE: BIOS images are available on support.dell.com.
1
Follow the previous steps to open the boot menu and access the
Re-Imaging Utility. When the boot menu appears, select the named
hard disk or flash drive containing the Re-Imaging Utility and press
<Enter>.
2
Once the boot up is complete the Devon IT Re-Imaging Utility Dell
Edition Main Menu is displayed.
3
Use the arrow keys to select <15> Write BIOS Image and press
<Enter>.
Dell OptiPlex FX130 and FX170 Re-Imaging Guide
|
13