Dell PowerEdge 1855 매뉴얼 사용 - 페이지 36
{카테고리_이름} Dell PowerEdge 1855에 대한 매뉴얼 사용을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 1855 44 페이지. Using dell blade servers in a dell poweredge high availability cluster
Dell PowerEdge 1855에 대해서도 마찬가지입니다: 정보 업데이트 (2 페이지), 빠른 시작 매뉴얼 (12 페이지), 사용자 설명서 (33 페이지)

For more information on configuring the tape and storage components, see
the storage and tape backup documentation.
Cabling Two PowerEdge Server Enclosures to One or Two Dell|EMC Storage
Systems
The PowerEdge blade cluster supports up to two PowerEdge server enclosures
and up to two Dell|EMC storage systems. In this configuration, two inter-
switch links (ISLs) are required to connect each pair of Fibre Channel switch
modules between the PowerEdge server enclosures.
For high availability, each PowerEdge server enclosure requires direct paths to
the attached storage systems. This configuration ensures that all running
applications are available if one of the PowerEdge server enclosures needs to
be shut down for maintenance.
Figure 2-6 shows two PowerEdge 1855/1955 server enclosures cabled to one
supported Dell|EMC storage system in an iSCSI configuration.
Figure 2-7 shows two PowerEdge M1000e server enclosures cabled to two
supported Dell|EMC storage systems in Fibre Channel configuration.
In both figures, the server module's dual-port Fibre Channel daughter card
and Fibre Channel modules are connected internally in the system chassis.
You can use a similar configuration model for other supported server modules,
server enclosures, and storage arrays.
36
Cabling Your Blade Cluster Hardware