Dell PowerEdge 1855 사용자 설명서 - 페이지 13
{카테고리_이름} Dell PowerEdge 1855에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 1855 33 페이지. Using dell blade servers in a dell poweredge high availability cluster
Dell PowerEdge 1855에 대해서도 마찬가지입니다: 정보 업데이트 (2 페이지), 빠른 시작 매뉴얼 (12 페이지), 매뉴얼 사용 (44 페이지)
페이지 인쇄
Virtual Media – Using this feature, you can remotely map local drives on a management workstation to the server module, or boot a server
¡
module to a remote diskette, optical drive, or USB key. For example, you can remotely perform operating system installation, operating system
recovery, BIOS updates, and other functions.
Virtual KVM – You can remotely boot to a server module using an operating system-independent graphical console.
¡
Figure 1-9
shows the external features on the Avocent Digital Access KVM switch module.
Figure 1-9. Avocent Digital Access KVM Switch Module
KVM Switch Module
The basic KVM switch module offered on systems sold prior to April 2005 provides basic switch functionality to monitor a server module. You must use the
custom cable provided with your system to connect the KVM module to the external devices. The custom cable provides two PS/2 connectors and one video
connector.
NOTE:
Your system has two custom cables—one that connects to the front of the server module to connect two USB devices and video, and a second
cable that connects to the KVM to provide two PS/2 connections and a video connection. The cables are not interchangeable. It is recommended that
you keep these custom cables available.
The KVM switch module also includes a back-panel system identification button and identification indicator (see Figure 1-10).
features on the KVM switch module.
Figure 1-10. KVM Switch Module Features
Table 1-8. KVM Switch Module Indicators and Features
Indicator
Icon
Identification button
ID
Identification indicator
NOTE:
After a back-panel KVM switch module is replaced or hot-swapped, its system identification indicator may start flashing. If this occurs, press the
identification button on the front of the system to reset the identification indicator.
Custom connector
Activity Indicator
Indicator Code
None
Press to activate the front and back identification indicators. To turn off the identification feature, press
the button again.
Off
System has not been selected for identification.
Amber
System is selected for identification.
Amber blinking
System is being identified.
None
Allows two PS/2 and one video device to be connected to the system.
Table 1-8
lists the indicators and