Dell PowerEdge 1955 매뉴얼 사용 - 페이지 17
{카테고리_이름} Dell PowerEdge 1955에 대한 매뉴얼 사용을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 1955 44 페이지. Using dell blade servers in a dell poweredge high availability cluster
Dell PowerEdge 1955에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (12 페이지)
페이지 인쇄
Network-Attached Cluster
Network-attached clusters provide configuration flexibility, expandability, and
performance. In a network-attached cluster, all of the nodes (server modules)
are attached to redundant switch fabrics. A network-attached cluster supports
the following configurations:
•
One or two storage systems using embedded switch fabrics
•
Up to four storage systems using external fabrics
Figure 1-4 shows the network-attached cluster connected to an external SAN
using embedded switch modules.
Figure 1-5 shows the network-attached cluster connected to an external SAN
using embedded pass-through modules.
Figure 1-6 shows the network-attached cluster connected to an external SAN
using embedded switch modules
NOTE:
Figure 1-4 through Figure 1-6 are for illustration only. Some cluster connections
shown below are routed internally through the PowerEdge server enclosure.
Figure 1-4. Network-Attached Cluster Connected to an External SAN Using Embedded
Switch Modules
cluster node
embedded
switch module
public network
private network
storage system
cluster node
embedded
switch module
Introduction
17