Dell PowerEdge 2800 수동 변환 - 페이지 18
{카테고리_이름} Dell PowerEdge 2800에 대한 수동 변환을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 2800 36 페이지. Poweredge 2800 server
Dell PowerEdge 2800에 대해서도 마찬가지입니다: 정보 업데이트 (24 페이지), 설치 매뉴얼 (22 페이지), 매뉴얼 (44 페이지), 하드웨어 설치 (14 페이지), 빠른 참조 (2 페이지), 사양 (2 페이지)
페이지 인쇄
Y1001bk0.book Page 16 Thursday, July 8, 2004 4:32 PM
Removing the Trim Panel
Remove the trim panel.
Lay the system on its cover as shown in Figure 1-7.
a
Using a #2 Phillips screwdriver or 1/4-inch nut driver, remove the three screws from the
b
side of the trim panel. See Figure 1-7.
Using a #2 Phillips screwdriver or 1/4-inch nut driver, remove the two screws from the
c
back of the system.
Slide the trim panel backward and then remove the trim panel from the chassis.
d
Figure 1-7. Removing the Trim Panel
Install the six shoulder nuts as shown in Figure 1-8.
NOTE:
the side.
The system is ready to install in the rack.
16
Tower-to-Rack and Rack-to-Tower Conversion Guide
Ensure that the shoulder nuts are tightened so that the shoulder of the nut is tight against
hex-head Phillips
screws (2)
hex-head Phillips
screws (3)