Dell PowerEdge 2900 설치 매뉴얼 - 페이지 8

{카테고리_이름} Dell PowerEdge 2900에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 2900 10 페이지. Tower-to-rack conversion guide
Dell PowerEdge 2900에 대해서도 마찬가지입니다: 설치 정보 (11 페이지), 설치 매뉴얼 (14 페이지), 업데이트 (2 페이지), 매뉴얼 (26 페이지)

페이지 인쇄

4 Remove the cooling shroud. See "Removing the Cooling Shroud" in your

Hardware Owner's Manual.

5 Remove the cable retention bracket from the right interior wall of the

chassis by pushing the blue release latch and sliding the bracket toward the

front of the system until the bracket detaches from the chassis slots.

6 Route the SATA cable in the cable channel in the right wall of the chassis

and replace the cable retention bracket over the cable. See Figure 1-4.

7 Route the SATA cable along the top of the cable retention bracket to the

central riser.

8 Bend the cable behind the central riser and connect the cable to the

SATA_B connector on the system board.

Figure 1-4. SATA Cable Routing in the PowerEdge 2950 and 2970

SATA_B connector on system board

SATA data cable

optical drive

Installing a SATA Optical Drive

cable retention bracket

SATA power cable