Dell PowerVault 110T LTO-2-L 핸드북 - 페이지 17
{카테고리_이름} Dell PowerVault 110T LTO-2-L에 대한 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault 110T LTO-2-L 28 페이지. Powervault tape systems
Dell PowerVault 110T LTO-2-L에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (10 페이지)
페이지 인쇄
Table 9. Characteristics of Expired LTO Cleaning Tape in Various Drives
Drive Type
Cleaning with a Good Tape
Dell PowerVault
No seven segment display
110T LTO-2
indicator.
Dell PowerVault
110T LTO-2-L
(Certance)
Dell PowerVault
110T LTO-2-L
(Tandberg)
Dell PowerVault
No seven segment display
110T LTO-3
indicator.
• Activity light blinks green.
• Ejects tape shorty after.
• Power light on solid green.
• Activity light on solid
green.
• Status light on solid amber.
• Ejects tape when
complete.
• Press and hold the Eject
button for 6 seconds. The
drive enters the service
mode indicated by all
LEDs flashing slowly.
• Press Eject twice. The
Activity LED flashes fast.
• Ejects tape shorty after.
• Activity light blinks green
• Ejects tape shorty after.
Cleaning with an Expired Tape
• Pre firmware 53Y3: No seven
segment display indicator. Activity
light blinks green but ejects tape
shortly after inserting.
• Firmware 53Y3 and newer:
– Seven segment display shows 7
– Activity light blinks amber
– Ejects tape shortly after
inserting. When tape is
completely removed, all light
indicators turn off.
• Power light on solid green.
• Activity light on solid green.
• Status light blinks amber.
• Ejects tape shortly after inserting.
• Cleaning light turns on.
• Activity light flashes.
• Fault light flashes.
• Cartridge hold in the drive
When pressing Eject button, the
cartridge is ejected and the Cleaning
light stays on.
• Seven segment display shows 7.
• Activity light blinks amber.
• Ejects tape shortly after inserting.
When tape is completely removed,
all light indicators turn off.
LTO Media Handbook
(continued)
17