Dell EMC PowerSwitch N3048ET-ON 펌웨어 업그레이드 방법 - 페이지 8

{카테고리_이름} Dell EMC PowerSwitch N3048ET-ON에 대한 펌웨어 업그레이드 방법을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell EMC PowerSwitch N3048ET-ON 21 페이지.

Upgrade Dell EMC Networking N3000E-ON Switches

4. Activate the

6.5.3.36

console#boot system backup

Activating image backup ..

5. Reload the switch.

console#reload

Management switch has unsaved changes.

Are you sure you want to continue? (y/n) y

Configuration Not Saved!

Are you sure you want to reload the stack? (y/n) y

6. After the switch has finished rebooting, log in and verify that the firmware has been updated to the

version using the show version command. A single switch will typically reboot in around two minutes. A

stack may take significantly longer to complete the upgrade process.

console#show version

Machine Description............... Dell EMC Networking Switch

System Model ID................... N3048EP-ON

Machine Type...................... Dell EMC Networking N3048EP-ON

Serial Number.....................

Manufacturer...................... 0xbc00

Burned In MAC Address............. 0090.BC06.A571

System Object ID.................. 1.3.6.1.4.1.674.10895.3060

SOC Version....................... BCM56340_A0

HW Version........................ 5

CPLD Version...................... 20

Image File........................ N3000Advv6.5.3.36

Software Capability............... Stack Limit = 12, VLAN Limit = 4093

unit active

---- ----------- ----------- -------------- --------------

6.5.3.36

7. The switch or stack is now ready for normal operation. Verify the configuration and make any changes

needed prior to connecting the switch to the operational network.

8. Reload the switch.

console#reload

Management switch has unsaved changes.

Are you sure you want to continue? (y/n) y

Configuration Not Saved!

Are you sure you want to reload the stack? (y/n) y

firmware

backup

current-active next-active

6.5.3.36

Page 4

6.5.3.36