Dell N20 Series 설치 매뉴얼 - 페이지 44

{카테고리_이름} Dell N20 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell N20 Series 48 페이지.

Please enter the SNMP community string to be used.

[public]: public

NOTE:

If it is configured, the default access level is set to the highest available access for the SNMP management interface.

Initially only SNMPv2 is activated. SNMPv3 is disabled until you return to configure security access for SNMPv3 (for example,

engine ID, view, and so on.).

Please enter the IP address of the Management System

(A.B.C.D) or wildcard (0.0.0.0) to manage from any

Management Station. [0.0.0.0]: 10.1.2.100

Step 2:

Now we need to set up your initial privilege (Level

15) user account. This account is used to login to the

CLI and Web interface. You may set up other accounts

and change privilege levels later. For more

information on setting up user accounts and changing

privilege levels, see the user documentation.

To set up a user account:

Please enter the user name. [root]:admin

Please enter the user password: ********

Please reenter the user password: ********

Step 3:

Next, IP addresses are set up on the OOB (Out-Of-Band)

Interface and/or the VLAN 1 routing interface.

You can use these IP addresses to access the CLI, Web

interface, or SNMP interface of the switch.

To access the switch through any Management Interface

you can

. Set up the IP address for the Management Interface.

. Set up the default gateway if IP address is

manually configured on both routing and OOB interface.

Would you like to set up the Out-Of-Band interface

now? [Y/N] y

Please enter the IP address of the device (A.B.C.D) or

enter "DHCP" (without the quotes) to automatically

request an IP address from the network DHCP server.

[DHCP]: dhcp

Step 4:

Would you like to set up the VLAN1 routing interface

now? [Y/N] y

Please enter the IP address of the device (A.B.C.D) or

enter "DHCP" (without the quotes) to automatically

request an IP address from the network DHCP server:

10.1.1.200

Please enter the IP subnet mask (A.B.C.D or /nn):

255.255.255.0

Step 5:

Finally, set up the default gateway. Please enter the

IP address of the gateway from which this network is

reachable. [0.0.0.0]: 10.1.1.1

Starting and Configuring the N30xx System

All manuals and user guides at all-guides.com