Dell poweredge VRTX 시작하기 매뉴얼 - 페이지 10

{카테고리_이름} Dell poweredge VRTX에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell poweredge VRTX 30 페이지. Server
Dell poweredge VRTX에 대해서도 마찬가지입니다: 사용자 설명서 (35 페이지), 릴리스 노트 (5 페이지), 시작하기 매뉴얼 (14 페이지), 빠른 시작 및 참조 매뉴얼 (2 페이지), 기술 매뉴얼 (45 페이지), 시작하기 (2 페이지)

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell

NOTE:

CLI and/or GUI need only be used if the default configuration is not

sufficient.

The switch can be configured in the following modes from the GUI:

•

Basic — Elementary network configuration for the switch.

•

Advanced — Full network configuration mode that enables configuration

of all switch capabilities. This mode is intended for advanced network

administrators.

To logon to the switch after it is inserted into the chassis, perform the

following:

1 Turn on the chassis. To display the IP address configured for the out-of-

band interface, go to the CMC GUI, options: I/O Module Overview >

Setup

2 Log on to the switch in one of the following ways:

–

Establish a Telnet session to the out-of-band IP address obtained in

the last step, and log on with the default user/password: root/calvin.

Continue managing the switch through the CLI (see "Using the CLI"

on page 11).

–

Open a GUI session from the CMC GUI, options: I/O Module

Overview > Properties > Launch IOM GUI. In the Login menu,

select either Basic or Advanced mode and use the default

user/password: root/calvin. Continue managing the switch through

the Network Administrator.

–

Connect to the IOM serial interface through the CMC. For that, use

the CMC command: connect switch. For more informations on this,

consult the

dell.com/support/manuals.

D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 3 / 6 / 1 3 - F O R P R O O F O N LY

Hardware and Initial Configuration

Plasma\GSG\Plasma_UGHW&InitialConfiguration.fm

CMC Command Line Reference

from