Dell poweredge VRTX 시작하기 매뉴얼 - 페이지 7

{카테고리_이름} Dell poweredge VRTX에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell poweredge VRTX 30 페이지. Server
Dell poweredge VRTX에 대해서도 마찬가지입니다: 사용자 설명서 (35 페이지), 릴리스 노트 (5 페이지), 시작하기 매뉴얼 (14 페이지), 빠른 시작 및 참조 매뉴얼 (2 페이지), 기술 매뉴얼 (45 페이지), 시작하기 (2 페이지)

페이지 인쇄

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell

•

Single Internal Out-of-Band port

The switch supports an Out-of-Band (OOB) port that is connected to the

management network of the chassis.

Port Naming Convention

There are 5 groups of ports, numbered 0-4. Group 0 represents the external

ports and groups 1-4 represents the internal ports that are connected to blade

servers 1-4.

External/Internal Ports

The following naming convention is used for internal and external ports:

gigabitethernet group/port_number or gi group/port_number

The following table maps the hardware network port numbers to the software

interface port numbers and describe how they are referred to in the CLI/GUI:

Table 1-1. Port Mapping Table

Port Type and Number

External ports 1-8

Internal ports 1-4

Internal ports 5-8

Internal ports 9-12

Internal ports 13-16

Out-of-Band port

Front Panel LEDs

The front panel contains LEDs and ports, as follows:

•

2 System LEDs — Status and Power. These are described in Table 1-2.

•

8 ports — Each having two associated LEDs. These are described in

Table 1-3.

Table 1-2. System LED's

State of Switch

Off

D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 3 / 6 / 1 3 - F O R P R O O F O N LY

Plasma\GSG\Plasma_UGHW&InitialConfiguration.fm

Software Port Naming Convention in CLI/WEB

gi0/1.... gi0/8

gi1/1.... gi1/4

gi2/1.... gi2/4

gi3/1.... gi3/4

gi4/1.... gi4/4

oob

Status LED Power LED (Green)

Off

Hardware and Initial Configuration

Description

Switch is powered-

off.