Dell PowerEdge XL 5133-4 시작하기 매뉴얼 - 페이지 14
{카테고리_이름} Dell PowerEdge XL 5133-4에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge XL 5133-4 38 페이지. Dell poweredge m i/o aggregator getting started guide
페이지 인쇄Plug-in modules and the base module (Figure 1-1) also contains LEDs that
provide information about the link status and traffic activity on a port.
Figure 1-5. Port LEDs
Table 1-2 describes the LED status of 10GbE BASE-T, 10GbE SFP+, and
40GbE QSFP+ ports used in stacking mode on the base module.
Ta b l e 1 - 2 .
P o r t L E D S t a t u s
Port LED
Color
Off
Green
Link Status
Yellow
Off
Activity
Blinking
Green
14
Hardware Overview
Meaning
The port is down.
The port is up and can transmit traffic at maximum
speed:
A QSFP+ port can transmit at 40G.
An SFP+ port can transmit at 10G.
A BASE-T port can transmit at 10G.
The port is up and is transmitting traffic at lower than
maximum speed:
A 40GbE QSFP+ port is transmitting at 10G.
A 10GbE SFP+ or 10GbE BASE-T port is
transmitting at 1G or 100M.
No traffic is being transmitted or received on the port.
Traffic is being transmitted or received on the port.
Link Status
Activity
Link Status
Activity
Link Status
Activity