Dell S4048-ON 구성 매뉴얼 - 페이지 11

{카테고리_이름} Dell S4048-ON에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell S4048-ON 30 페이지. Enterprise switches
Dell S4048-ON에 대해서도 마찬가지입니다: 구성 매뉴얼 (19 페이지), 문제 해결 매뉴얼 (29 페이지)

Dell S4048-ON 구성 매뉴얼
Switch configuration (OS 9.x)
2.1.11

Configure QSFP ports for LAG

Assign 40Gb QSFP ports to the port channel.
Dell(conf)#interface range fortyGigE 1/49 , fortyGigE 1/50
Dell(conf-if-range-fo-1/49,fo-1/50)#no ip address
Dell(conf-if-range-fo-1/49,fo-1/50)#mtu 12000
Dell(conf-if-range-te-1/49,fo-1/50)#no shutdown
Dell(conf-if-range-fo-1/49,fo-1/50)#flowcontrol rx on tx off
Dell(conf-if-range-fo-1/49,fo-1/50)#port-channel-protocol lacp
Dell(conf-if-range-fo-1/49,fo-1/50-lacp)#port-channel 1 mode active
Dell(conf-if-range-fo-1/49,fo-1/50-lacp)#exit
Dell(conf-if-range-fo-1/49,fo-1/50)#exit
Dell(conf)#exit
2.1.12

Save configuration

Dell#copy running-config startup-config
2.1.13

Configure additional switch

Repeat the commands from section 2.1 to configure the second switch.
Note: The preceding procedure places all switch ports in the default VLAN. If you prefer to place ports in a
non-default VLAN, refer to the documentation for your switch.
11
Dell EMC Networking S4048-ON Switch Configuration Guide for Dell PS Series SANs | SCG1026