Dell S4148F-ON Series 설치 매뉴얼 - 페이지 27

{카테고리_이름} Dell S4148F-ON Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell S4148F-ON Series 47 페이지.
Dell S4148F-ON Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (48 페이지)

페이지 인쇄
Dell S4148F-ON Series 설치 매뉴얼
Figure 15. Front rack installation
NOTE:
Do not the use the mounted Ready-Rails as a shelf or a workplace.
3
Tighten the two thumb screws and rack screws.
To remove the chassis from the rack or cabinet, press in the two side-release bars on the chassis at the same time and slide the chassis
forward.

Optics installation

The S4100–ON Series (S4128F-ON and S4148F-ON) switch has the following optic configurations:
Table 12. S4100-ON Series optic configurations
Platform
S4128F-ON
S4148F-ON
For a list of supported optics, see the S4100–ON Series data sheet at
CAUTION:
ESD damage can occur if components are mishandled. Always wear an ESD-preventive wrist or heel ground strap
when handling the S4100–ON Series and its components.
Description
•
28 fixed SFP+ optical ports
•
2 fixed QSFP28 optical ports
•
48 fixed SFP+ optical ports
•
2 fixed QSFP+ optical ports
•
4 fixed QSFP28 optical ports
www.dell.com/support
or contact your Dell EMC representative.
S4100–ON Series installation
27