Dell 5530 Mono Laser 서비스 매뉴얼 - 페이지 34

{카테고리_이름} Dell 5530 Mono Laser에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell 5530 Mono Laser 46 페이지. Loading paper and specialty media
Dell 5530 Mono Laser에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (2 페이지), 설정 및 사양 매뉴얼 (29 페이지), 설정 및 사양 (29 페이지)

페이지 인쇄
Dell 5530 Mono Laser 서비스 매뉴얼
a
Battery
b
Base cover
7
Follow the procedures in
Display Assembly

Removing the Display Assembly

1
Follow the procedures in
2
Remove the:
a
base cover
b
battery
3
Perform the following steps:
a
Release the Mylar tape that secures the display cable to the system board [1].
b Lift the latch and disconnect the display cable from the connector on the system board [2].
c
Release the Mylar tape that secures the display cable to the system board [3].
d Remove the M2x4 (2) screws and lift the metal bracket that holds the left video-card fan to the system board [4].
e
Un-route the display cable from the restraints clips [5]
f
Disconnect the display cable from the system board [6].
4
To remove the display assembly:
a
Place the computer at the edge of a flat surface and remove the M2.5x5 (6) screws securing the display assembly to the
system chassis [1].
b Lift the display assembly away from the system chassis [2].
34
Disassembly and reassembly
After Working Inside Your
Computer.
Before Working Inside Your
Computer.