Miele Novotronic G 841 SC Plus 사용 설명서 - 페이지 37

{카테고리_이름} Miele Novotronic G 841 SC Plus에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele Novotronic G 841 SC Plus 49 페이지. Miele novotronic dishwasher operating instructions
Miele Novotronic G 841 SC Plus에 대해서도 마찬가지입니다: 사용 설명서 (48 페이지)

Miele Novotronic G 841 SC Plus 사용 설명서
The dishes were not
loaded correctly.
The program was not
powerful enough.
Not enough detergent
was dispensed.
The spray arm jets are
clogged.
The triple filter is clogged
or not correctly seated.
The drain pump or the
non-return valve are
blocked.
The wash temperature of
the selected program was
too low.
Not enough detergent
was used.
Not enough rinse aid was
used.
The salt reservoir is
empty.
The salt reservoir cap was
not correctly screwed on.
The programmed setting
of the water softener is too
low.
The rinse aid dosage is
set too high.
See, "Loading the dish-
washer".
Select a more intensive
program see, "Program
guide".
Use more detergent, see,

"Adding detergent".

Clean the spray arm jets,
see, maintenance instruc-
tions.
Clean and/or reseat the fil-
ter, see, maintenance in-
structions.
Clean the drain pump and
the non-return valve, see
maintenance instructions.
Select a program with a
higher temperature.
Use more detergent.
Increase the dosage,
see "Before using for the
first time".
Add reactivation salt,
see "Before using for the
first time".
Reseat it making sure it
screws back on correctly.
Adjust the setting of the
water softener , see "Be-
fore using for the first
time".
Reduce the dosage, see
"Before using for the first
time".
37