Miele Novotronic G 841 SC Plus 사용 설명서 - 페이지 34
{카테고리_이름} Miele Novotronic G 841 SC Plus에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele Novotronic G 841 SC Plus 48 페이지. Miele novotronic dishwasher operating instructions
Miele Novotronic G 841 SC Plus에 대해서도 마찬가지입니다: 사용 설명서 (49 페이지)
페이지 인쇄
Frequently asked questions
With the aid of the following guide, minor problems can be fixed without a service
call.
,
Repairs should only be carried out by a qualified and trained person in ac-
cordance with local and national safety regulations. Unauthorized repairs could
cause personal injury or machine damage.
What if ...
the dishwasher does not
start?
the dishwasher does not
start, after pressing the
"Start" button and
the "Start" indicator
flashes?
the dishwasher stops
during a program?
the "Intake/Drain" indi-
cator is lit or flashing
and the dishwasher may
have stopped?
34
Possible fault
The door is not properly
closed.
The machine is not
plugged in.
The fuse is defective or
the breaker has tripped.
The program selector is
set to "Stop".
The fuse or breaker has
tripped.
The water valve is closed. Open the water valve.
The filter in the water inlet
is blocked.
The flow pressure at the
water inlet is less than
4.5 psi (0.3 bar).
The waterproof system
has activated.
Fix
Close the door firmly.
Insert the plug.
Reset the circuit breaker.
Make sure it is a 15 A
breaker.
– Turn the program selec-
tor to the desired pro-
gram.
– Press the "Start" button.
Reset the circuit breaker.
Make sure it is a 15 A
breaker.
See maintenance instruc-
tions.
Contact a plumber.
Call the Miele Technical
Service Department.