Miele ULTRA FULLSIZE DISHWASHER 설치 지침 매뉴얼 - 페이지 13

{카테고리_이름} Miele ULTRA FULLSIZE DISHWASHER에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele ULTRA FULLSIZE DISHWASHER 40 페이지.

The dishwasher must be installed so

that the water and electricity supplies

can be accessed through an adjacent

cabinet. The supplies must not be

located behind the machine.

WARNING - Fire hazard

Do not cover or crush the plug of an

electric appliance. Ensure that the

cabinet opening for the dishwasher

provides ample space for the plug.

Installing the dishwasher in a tight

space may crimp the power cord or

put pressure on the plug which may

cause overheating.

The floor of the cut out where the

dishwasher will be installed should be

even in height with the surrounding

kitchen floor. Plywood can be secured

to the floor to make the two areas even.

^ Make a 2" x 4" (5 x 10 cm) cut out in

the side or bottom of the cabinet

adjoining the dishwasher. This cut out

is necessary for connections to pass

through.

^ Make certain that there are no rough

edges that could damage the power

cord or hoses. If metal cabinets are

used, place the supplied rubber

grommet around the edge of the

opening before passing the cable

through.

^ Slide the machine into the opening,

making sure the electrical cable and

hoses can reach their connection

points without kinking.

The drain hose connection at the rear of

the dishwasher can be turned to allow

the hose to be angled to the right or

left.

Exercise care when sliding the

dishwasher in or out, to prevent

damaging the power cord or hoses.