Miele DA 399 작동 및 설치 지침 - 페이지 12

{카테고리_이름} Miele DA 399에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 399 28 페이지. Cooker
Miele DA 399에 대해서도 마찬가지입니다: 운영 및 설치 매뉴얼 (28 페이지)

페이지 인쇄

Before any cleaning or maintenance

work is carried out, disconnect the

cooker hood from the mains supply.

Ensure that:

– it is switched off at the wall socket

and the plug is withdrawn, or

– the fuse is withdrawn from the

fused spur connection unit, or

– the mains fuse is withdrawn,or

– the screw-out fuse is removed

(in countries where this is

applicable).

The surfaces and controls are

susceptible to scratches and

abrasions. Please observe the

following cleaning instructions.

^ All external surfaces and controls can

be cleaned using warm water with a

little washing-up liquid applied with a

well wrung-out soft sponge or cloth.

^ Wipe the surfaces dry using a soft

cloth.

Do not use too much water when

cleaning the controls. Water could

penetrate into the electronics and

cause damage.

^ A microfibre "E-Cloth" is available

from the Miele UK Spare Parts

Department, which is suitable for

cleaning surfaces such as stainless

steel, glass, plastic and chrome

without the use of chemicals.

Avoid:

– cleaning agents containing soda,

acids, chlorides or solvents,

– abrasive cleaning agents, e.g.

powder cleaners or cream cleaners

and abrasive sponges, as well as pot

scourers or sponges which have

been used previously with abrasive

cleaning agents.

These will damage the surface

material.

(This infomation does not apply to the

controls).

Stainless steel surfaces can be cleaned

using the Miele E-Cloth, or with a

proprietary non-abrasive cleaning

agent designed specifically for use on

stainless steel.

To help prevent re-soiling, proprietary

conditioning agents for stainless steel

can also be used. Apply sparingly with

an even pressure in the direction of the

"grain".