Miele DA 4228 W Puristic Plus 작동 및 설치 지침 - 페이지 34
{카테고리_이름} Miele DA 4228 W Puristic Plus에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 4228 W Puristic Plus 48 페이지.
페이지 인쇄
Cleaning and care
Unsuitable cleaning agents
Unsuitable cleaning agents can cause
damage to the surface of the filters if
used regularly.
Do not use:
- cleaning agents containing descaling
agents
- powder cleaners, cream cleaners
- aggressive multi-purpose cleaning
agents or spray cleaners for grease
- oven sprays
Cleaning the grease filters in the
dishwasher
Place the grease filters upright or
slightly inclined in the lower basket.
Ensure the spray arm is not
obstructed.
Use a commercially available
household dishwasher detergent.
Select a dishwasher programme with
a wash temperature between 50 °C
and 65 °C.
Depending on the detergent used,
cleaning the filters in a dishwasher
may cause the inside filter surfaces to
become discoloured. This will not
affect the functioning of the grease
filters in any way.
After cleaning
After cleaning, leave the filters to dry
on an absorbent surface before
replacing them.
34
When removing the filters for
cleaning, also clean off any residues
of oil or fat from the now accessible
housing to prevent the risk of these
catching fire.
Refit the grease filters, making sure
that the latch faces outwards.
If a grease filter is inadvertently fitted
upside down, insert a small
screwdriver blade into the slit to
disengage the clip.
Resetting the grease filter operating
hours counter
After cleaning, the operating hours
counter needs to be reset.
Whilst the fan is switched on, press
the operating hours control for
approx. 3 seconds, until only 1 is
flashing.
The grease filter symbol goes out.
If you want to clean the grease filters
before the operating hours counter has
reached its maximum:
Press the operating hours
control for approx. 6 seconds,
until only 1 is flashing.