Miele DA2210 설치 지침 매뉴얼 - 페이지 9

{카테고리_이름} Miele DA2210에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA2210 19 페이지. Cooker
Miele DA2210에 대해서도 마찬가지입니다: 작동 및 설치 지침 (36 페이지), 치수 매뉴얼 (1 페이지), 운영 및 설치 매뉴얼 (40 페이지), 작동 및 설치 지침 (40 페이지), 사용자 설명서 (40 페이지), 작동 및 설치 지침 (40 페이지), 작동 및 설치 지침 (44 페이지)

Installation

^ Please read the "Important Safety

Instructions" and Installation

instructions before installing this

hood.

The hood comes equipped with a

non-return flap. This flap automatically

closes when the hood is turned off so

that no exchange of outside air and

room air can occur.

Uninstall the non-return flap when your

exhaust system is equipped with a

non-return flap or if the hood is used in

recirculation mode.

^ Holding the non-return flap at the

wire, pull it out of the bracket.

The DA 2280 is equipped with one, the

DA 2210 with two non-return flaps.

CAUTION

To avoid risk of hand or other injury,

avoid contact with sharp edges

during the assembly and installation

process.

Installation

The hood is designed to be installed

within cabinetry and kitchen islands.

The top half (motor and fan assembly)

should be accessible after installation.

If the motor and fan assembly are not

accessible, assemble the ductwork and

the electrical connection before the

installation.

^ Insert and align the hood from the

bottom up in the cut out.

^ Secure the hood through the frame

with the screws (3.5 x 16 mm).