Miele DA250-4 작동 및 설치 지침 - 페이지 30

{카테고리_이름} Miele DA250-4에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA250-4 32 페이지. Miele da250-4 hoods: install guide
Miele DA250-4에 대해서도 마찬가지입니다: 치수 매뉴얼 (2 페이지), 설치 매뉴얼 (1 페이지), 설치 매뉴얼 (10 페이지)

페이지 인쇄

1. Installation Instructions

Air extraction

– If the exhaust is ducted into an

inactive flue, the air must be expelled

parallel to the flow direction of the

flue.

Never connect an exhaust hood to

an active chimney, dryer vent, flue,

or room venting ductwork. Seek

professional advice before

connecting an exhaust hood vent to

an existing, inactive chimney or vent

flue.

Important

If the ductwork runs through rooms,

ceilings, garages, etc. where

temperature variations exist, it may

need to be insulated to reduce

condensation.

Condensate trap

optional accessory

In some cases, a condensate trap may

be required to collect and evaporate

any condensation which may develop.

This optional accessory is available for

ducts 5" (125 mm) and 5

in diameter.

^ When installing a condensate trap,

ensure that it is positioned vertically

and if possible directly above the

exhaust outlet.

" (150 mm)